Power Distribution Board (PDB ) 3A BEC 5V 2A 12V 0.5A with XT60 Plug
$6.90
Power Distribution Board (3A PDB ) BEC 5V 2A 12V 0.5A with XT60 Plug
Specifications :
Input voltage range (3S-4S LiPo operation): 9 – 18V DC
Regulated 5V and 12V outputs
LED power indicators ( 5V & 12V outputs )
- For Vehicle Type: Airplanes
- Wheelbase: Screws
- Use: Vehicles & Remote Control Toys
- Technical parameters: Value 2
- Remote Control Peripherals/Devices: ESC
ESC outputs:
Continuous current: 25A*4 or 15A*6
Peak current (10 seconds/minute): 30A*4 or 20A*6
BEC 5V output:
Designed for RC Receivers, Flight controllers, OSD, and Servos.
DC/DC synchronous buck regulator.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant (5 seconds/minute)
BEC 12V output:
Designed for Video TX or FPV camera with linear regulator.
The battery should be 4S LiPo (13~18V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant (2 seconds/minute)
BEC 12V @ 3S LiPo
Output voltage= 3S LiPo voltage -1V
Pick up Location: Kingsford (Sydney) NSW 2032, Australia
1 in stock
Additional information
| Brand | Matek Systems |
|---|
